PETROCHEMICAL, OIL & GAS EQUIPMENT. STATIC AND ROTATING EQUIPMENT.
|
CONSTRUCTION AND AGRICULTURAL EQUIPMENT
|
ACCESSORIES AUXILIARY EQUIPMENT STATIC EQUIPMENT
|
CONSTRUCTION MATERIAL PRODUCTION LINES TURN-KEY PLANT SOLUTIONS ACCESSORIES AUXILIARY EQUIPMENT
|
ENTERTAINMENT AND AMUSEMENT EQUIPMENT
|
CHEMICAL PRODUCTS
PETROCHEMICAL, OIL & GAS EQUIPMENT. STATIC AND ROTATING EQUIPMENT.
Steam Heat Exchanger
Please call:
+86-852-65449650
EMAIL:
sales@hcpetroleum.hk
Brief Introduction
Steam-heat exchangers are used to raise the temperature of the well effluents to prevent hydrate formation, reduce viscosity, and break down emulsions for efficient separation of oil ,gas and water, providing heat directly from adequate steam usually supplied by a steam generator.The heat exchanging efficiency of this kind of method is higher and can eliminate potential fire risk.Heat from the steam is transferred to the tubing bundle and in turn, to the fluid. The coil pipes are divided into upstream and downstream, equipped with an adjustable nozzle in the middle. The nozzle allows more and sufficient heat exchanging by reducing the flowrate of fluid passing through downstream coil pipes.
Feature
Improved efficiency through hydrate formation prevention, viscosity reduction, and emulsions breakdown.
Direct heating by steam from a steam generator.
Increase safety by eliminating fire risk.
Low heat consumption, high exchanging efficiency.
Glass-wool insulation with aluminum jacket.
Adjustable nozzle increase heat exchanging efficiency by reducing the downstream flowrate.
The temperature controller in steam inlet controls the temperature of the heated fluid to automatically Adjust how much steam should be supplied for operation.
A mist catcher in steam outlet only allows liquid water to pass, achieving the goal of maximum energy saving.
Double safety systems:the spring safety valve, rupture disk on the top of the vessel.
Parameter
Working environment: Anti-sulfur EE or anti-acid 15%
Pressure level: 35MPa
Connection mode: 3" Fig 602 unoin
Coil pipe material: 20G anti-sulfur EE, 20G+316L anti-acid 15%
Heat exchanging capacity: | 4mmbtu/h |
Steam needed | 125PSI |
Max design temperature(coil) | 204℃ |
Minium design temperature(coil) | 0℃ |
Max design temperature(Shell) | 200℃ |
Pressure level(shell) | 1.1MPa |
Pressure level(upstream coil) | 5000psi |
Pressure level(dowmstream coil) | 5000psi |
Nominal outside diameter( upstream coil) | Φ89 |
Nominal inside diameter(upstream coil) | Φ57 |
Nominal inside diameter(dowmstream coil) | Φ57 |
Dimension(L*W*H) | 7.4m(L)×2.1m(W)×2.4m(H) |
Weight | about 10,000kg |
Inquiry